Published at Wednesday, February 07th, 2018 - 21:52:15 PM. . By Kathleen.
Then take the cable out of the pack and run it in between the lighting units. The better kits will have the cable with plugs on the end. All you need to do is to put the plug from the end of the cable into the socket in the light unit. You may also need to fix the cable to the unit to prevent it from hanging down. A staple gun or anything else which can be used to tack the wire should be fine.
Ventilation, the ventilation system of a bathroom typically consists of a fan mounted into the ceiling. This pulls humid and hot air out through a duct that leads either into the soffit or directly into a roof vent. A ventilation fans ability to move air is measured by a cubic feet per minute scale of CFM. The higher the CFM rating, the faster the fan will pull air out of the bathroom. Many ventilation kits also involve a light fixture that allows you to get both a functional ventilation system and a fashionable light.
Any content, trademark’s, or other material that might be found on the US Beam website that is not US Beam’s property remains the copyright of its respective owner/s. In no way does US Beam claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 US Beam. All Rights Reserved.